- Single stage type centrifugal extractor
- Model BXP
- It will be useful
to apply the above
before contacting us.
- Drive unit including bearing is located on the non-liquid contact part to avoid the contamination of the treating medium.
- Mixing disc is changeable according to the treating medium, and the efficient extracting is possible.
- For the treatment of corrosive solvent, all liquid contact part made of PVDF is possible.
- Optional CIP system can be installed.
- Possibility to connect several BXP in series (no inter-stage pumps required) to achieve the required number of stages.
- Remained quantity of liquid in the machine is short in comparison with the capacity. Batch operation is possible.
- Contacting time of two liquids is short. It is possible to reduce the risk of product degradation.
- Centrifugation is done after extraction. If the difference in density ratio of two liquids is small, the extraction process is possible.
- Specifications
- Cross section drawing
- Example of the Time Chart
- Treating medium
- Explanation by an animation
- Patents and Utility models
- Others
Nominal flow rate is depending on the viscosity of the treating medium, the emulsification tendency, the density ratio and flow rate ratio.
Nominal flow rate is depending on the viscosity of the treating medium, the emulsification tendency, the density ratio and flow rate ratio.
Nominal flow rate is depending on the viscosity of the treating medium, the emulsification tendency, the density ratio and flow rate ratio.
・Two immiscible liquids fed from the bottom of centrifugal extractor are mixed by rotating mixing disc and then extracted efficiently.
・Mixture after extraction is inlet to the inside of centrifugal extractor, and separated by the centrifugal force.
・For multi-stage extraction processes, BXP centrifugal extractors can be installed in series to provide the required number of stages. No inter-stage pumps are required between the extractors.
| ・Pharmaceuticals | ： | Purification of active principles (e.g. Antibiotics) |
| ・Chemicals | ： | Washing (example: polymers), Extraction (e.g. Acetic acid) |
| ・Foods | ： | Purification of food components (e.g. Lactic and Citric acid) |
| ・Hydrometallurgical method | ： | Separation and/or Purification(precious metal etc.,) |
| ・Others | ： | Perfumes, Aromas, Essential oils,…. |
