JP CN

Model BXP

Single stage type centrifugal extractor

Characteristics

  • Drive unit including bearing is located on the non-liquid contact part to avoid the contamination of the treating medium.
  • Mixing disc is changeable according to the treating medium, and the efficient extracting is possible.
  • For the treatment of corrosive solvent, all liquid contact part made of PVDF is possible.
  • Optional CIP system can be installed.
  • Possibility to connect several BXP in series (no inter-stage pumps required) to achieve the required number of stages.
  • Remained quantity of liquid in the machine is short in comparison with the capacity. Batch operation is possible.
  • Contacting time of two liquids is short. It is possible to reduce the risk of product degradation.
  • Centrifugation is done after extraction. If the difference in density ratio of two liquids is small, the extraction process is possible.

Cross section


Specifications

metallic

Made of PVDF
For research (metal only)

Please feel free to contact us for any inquiry.

Osaka sales division

+81 (6) 6321 5825

Tokyo sales division

+81 (3) 3846 0841